Commercial pilot lesson

Commercial Pilot Lesson

Becoming a commercial pilot is a challenging but rewarding career path. As with any profession, it requires dedication, hard work and a willingness to learn. If you’re considering becoming a commercial pilot, then you’re in the right place. In this article, we’ll take a look at what to expect during a typical commercial pilot lesson.

Introduction to Flight Instruments

A commercial pilot lesson would usually begin with an introduction to flight instruments. These instruments provide critical information to the pilot during flight. It is important for pilots to be familiar with the different types of instruments and their functions.

The airspeed indicator, for example, tells the pilot how fast the aircraft is traveling through the air. The attitude indicator shows the aircraft’s pitch and roll. The altimeter indicates the altitude of the aircraft above sea level. The vertical speed indicator displays the rate at which the aircraft is ascending or descending. The heading indicator displays the aircraft’s heading.

Principles of Flight

Next, a commercial pilot lesson would typically cover the principles of flight. These principles include lift, weight, thrust, and drag. The pilot needs to have a basic understanding of these principles to be able to control the aircraft.

Lift is the force that allows the aircraft to stay in the air. Weight is the force that pulls the aircraft down. Thrust is the force generated by the aircraft’s engines that propels it forward. Drag is the force that opposes the motion of the aircraft.

Understanding these principles is essential for a pilot to be able to fly safely and efficiently.

Pre-Flight Inspections

Once the pilot has a basic understanding of flight instruments and the principles of flight, they will typically move on to pre-flight inspections. This involves checking the aircraft thoroughly before takeoff.

The pilot will check the flight controls, fuel levels and quality, engine oil levels and quality, hydraulic fluid levels and quality, tire condition, and various other components of the aircraft.

Pre-flight inspections are crucial to ensure the safety of the flight. Any issues that are detected during the inspection need to be addressed before the aircraft takes off.

Takeoff and Climb

After completing the pre-flight inspection, the pilot is ready for takeoff. The pilot needs to ensure that the aircraft is aligned with the runway and that the engine is at full power.

The pilot will then gradually increase the aircraft’s speed until it reaches the takeoff speed. Once the aircraft reaches the takeoff speed, the pilot will rotate the aircraft to a suitable angle to begin the climb.

During the climb, the pilot needs to maintain a safe airspeed and altitude. The climb rate will vary depending on the aircraft and weather conditions.


Once the aircraft reaches cruising altitude, the pilot will typically set a cruise speed and altitude. The pilot needs to maintain the aircraft’s speed and altitude during the cruise phase of the flight.

During the cruise phase, the pilot will typically monitor the fuel levels, weather conditions and any other factors that may affect the flight.

Descent and Landing

As the aircraft approaches the destination airport, the pilot needs to begin the descent. The pilot will typically reduce the aircraft’s speed and altitude gradually.

The pilot will then line up the aircraft with the runway and reduce the speed further. The pilot needs to ensure that the aircraft touches down smoothly and safely.


In conclusion, a commercial pilot lesson would typically cover flight instruments, the principles of flight, pre-flight inspections, takeoff and climb, cruise, and descent and landing. Becoming a commercial pilot requires a lot of hard work and dedication, but it is a rewarding career path for those who are willing to put in the effort.






Leave a Reply

Your email address will not be published. Required fields are marked *